Fittings and other
PVC Adaptor
Adapters PVC manufactured in accordance with organization number 96365-1910 ST-TOO-03-2011. Adapters are used to connect PVC casing pipes of different
diameters to each other and with the filter casing column, as well as to connect the pipelines transporting water for drinking water, at temperatures from 0 ° C to
45 ° C, and other liquid and gaseous substances, the which is chemically resistant PVC.
Basic parameters and dimensions
diameter adapters, mm |
The thickness of the wall adapter, mm |
Adapter length, mm |
||
|
Rated |
Maximum deviation |
Rated |
Maximum deviation |
|
|
195х90 |
14/8 |
+0,8 |
400-600 |
+5,0 |
|
195х140 |
14/10 |
+0,8 |
400-600 |
+5,0 |
|
140х90 |
10/8 |
+0,7 |
400-600 |
+5,0 |
|
140х110 |
10/8,1 |
+0,7 |
400-600 |
+5,0 |
|
90х113 |
8/10 |
+0,7 |
400-600 |
+5,0 |
|
113х90 |
10/8 |
+0,7 |
400-600 |
+5,0 |
|
195х113 |
14/10 |
+0,8 |
400-600 |
+5,0 |
Adapter HDPE
Adapters of the high-density polyethylene produced by the Standard Organization № CT 96365-1910-LLP-05-2011. Adapters are used to connect the HDPE casing
pipes of different diameters to each other and with the filter casing column, as well as to connect the pipelines to transport water for drinking water and other
liquids, acid, gaseous matter, which is chemically resistant polyethylene.
Basic parameters and dimensions
|
Dimensions, mm |
Wall thickness, mm |
Length, mm |
||
|
Rated |
Maximum deviation |
Rated |
Maximum deviation |
|
|
adapter HDPE 90 90вн.×110н. |
18 |
+1,0 |
350-400 |
+5,0 |
|
adapter HDPE 90110вн.×90н |
18 |
+1,0 |
350-400 |
+5,0 |
|
adapter HDPE 90 160вн.×90вн. |
18/20 |
+1,3 |
400-450 |
+5,0 |
|
adapter HDPE 90 160н.×110вн. |
18/18 |
+1,2 |
350-400 |
+5,0 |
|
adapter HDPE 90 160вн.×110н. |
18/18 |
+1,3 |
400-450 |
+5,0 |
|
adapter HDPE 90 210вн.×110н. |
18/18 |
+1,5 |
550-600 |
+5,0 |
|
adapter HDPE 90 210н.×110вн. |
18/18 |
+1,5 |
550-600 |
+5,0 |
|
adapter HDPE 90 210вн.×195н. |
18 |
+1,0 |
400-450 |
+5,0 |
Frame-disc filters
Frame-disc filters (hereinafter - the KDF filters are available in Standard, the organization number ST-96365 1910-LLP-04-2011. KDF filters are a set of disks made
of polymeric material collected on the perforated PVC frame (trumpet) and forming a transverse annular gap conic section .
Filters are designed to be used:
wells-in process for in-situ leaching (PSV) technology to filter the sulfuric acid solutions with concentrations up to 30 mg/dm3 in their fence and discharge in the
producing horizons represented inequigranular sands;
vodoosusheniya-in systems and land reclamation;
in-water intake wells for drinking and household water supply;
-pre-treatment with water and sewage;
at the device drain-sand filters.
Basic parameters and dimensions
|
Designation of the filter |
Inner diameter, mm |
Outer diameter, mm |
Length of section, mm |
The gap width, mm |
The length of the working part, mm |
The number of diametrical slots on the ring, pcs |
Duty cycle of the filter,% not less |
Number of disks 1 m of the working part of the filter unit. |
|
KDF 118х90 |
74 |
118 |
2000 |
0,5 |
1800 |
120 |
15 |
116-135 |
|
KDF 91х63 |
51 |
91 |
2000 |
0,5 |
1800 |
92 |
13 |
116 |
|
KDF 186х140 |
120 |
186 |
2000 |
0,5 |
1800 |
188 |
13 |
116 |
Filters slotted
Filters slot (hereinafter - the filters) manufactured in accordance with organization number ST-96365 1910-LLP-07-2011. Filters made of polymeric materials are
cut by a tube having a slit of different widths along the circumference.
Filters are made of different diameters and are intended for use:
wells-in process at PSV (in-situ leaching) technology to filter sulfuric acid solutions with concentrations up to 30 mg/dm3 in their fence and discharge in the
producing horizons represented inequigranular sands;
vodoosusheniya-in systems and land reclamation;
in-water intake wells for drinking and household water supply;
-pre-treatment with water and sewage;
at the device drain-sand filters.
Basic parameters and dimensions of filters
|
Designation of the filter |
Inner diameter, mm |
Outer diameter, mm |
Current nominal length, mm |
The distance between the slits, mm |
The number of diametrical slots in the series, ea. |
The nominal width of the gap, mm |
Duty cycle of the filter,% not less |
Number of rows of slots for 1 m of the working of the filter unit. |
|
CHF 63 |
51 |
63 |
2000; 3000; 4000; 5000; 6000; |
5,0 |
3 |
0,5 |
5,6 |
182 |
|
0,7 |
7,6 |
175 |
||||||
|
1,0 |
10,4 |
167 |
||||||
|
1,2 |
12,1 |
161 |
||||||
|
1,5 |
14,4 |
154 |
||||||
|
1,8 |
16,5 |
147 |
||||||
|
2,0 |
17,8 |
143 |
||||||
|
CHF 90 |
74 |
90 |
2000; 3000; 4000; 5000; 6000; |
5,0 |
3 |
0,5 |
6,7 |
182 |
|
0,7 |
9,1 |
175 |
||||||
|
1,0 |
12,3 |
167 |
||||||
|
1,2 |
14,3 |
161 |
||||||
|
1,5 |
17,1 |
154 |
||||||
|
1,8 |
19,6 |
147 |
||||||
|
2,0 |
21,2 |
143 |
||||||
|
CHF 110 |
94 |
110 |
2000; 3000; 4000; 5000; 6000; |
5,0 |
3 |
0,5 |
7,2 |
182 |
|
0,7 |
9,7 |
175 |
||||||
|
1,0 |
13,3 |
167 |
||||||
|
1,2 |
15,4 |
161 |
||||||
|
1,5 |
18,4 |
154 |
||||||
|
1,8 |
21,1 |
147 |
||||||
|
2,0 |
22,7 |
143 |
||||||
|
CHF 140 |
120 |
140 |
2000; 3000; 4000; 5000; 6000; |
5,0 |
4 |
0,5 |
7,1 |
182 |
|
0,7 |
9,6 |
175 |
||||||
|
1,0 |
13,1 |
167 |
||||||
|
1,2 |
15,2 |
161 |
||||||
|
1,5 |
18,2 |
154 |
||||||
|
1,8 |
20,8 |
147 |
||||||
|
2,0 |
22,5 |
143 |
Covers PVC casing
Covers PVC casing annular cross-section (hereinafter - the cover) are available on the organization of the Standard number ST-96365 1910-LLP-08-2011. The covers
are designed to close the top and bottom of the casing to eliminate the ingress of soil and foreign material in the production casing. Also, for the detention of the
barrel column productive mass coming through the perforations in the casing and when the time for conservation or technological necessity.
Basic parameters and dimensions of closures
|
Наименования изделий |
Wall thickness, mm |
The average outer diameter, mm |
Length, mm |
||||
|
Rated |
Maximum deviation |
Rated |
Maximum deviation |
Rated |
Maximum deviation |
||
|
from the stub by thread |
from the stub by thread |
||||||
|
Cover the bottom of PVC-90 |
8 |
+0,6 |
90 |
100 |
+0,3 |
150 |
±2,5 |
|
Cover the top of PVC-90 |
8 |
+0,6 |
90 |
90 |
+0,3 |
150 |
±2,5 |
|
Cover the bottom of PVC-113 |
10 |
+0,7 |
113 |
128 |
+0,3 |
150 |
±2,5 |
|
Cover the top of PVC-113 |
10 |
+0,7 |
113 |
113 |
+0,3 |
150 |
±2,5 |
|
Cover the top of PVC-195 |
14 |
+0,9 |
195 |
195 |
+0,4 |
150 |
±2,5 |
Sump plug made of polyethylene (HDPE)
Cork HDPE tank manufactured in accordance with organization number 96365-1910 ST-TOO-05-2011. Cork is designed to seal the tank (cap) tank leaching wells
operating in the pressure and pressure conditions.
Basic parameters and dimensions
|
Dimensions, mm |
Wall thickness, mm |
Length, mm |
||
|
Rated |
Maximum deviation |
Rated |
Maximum deviation |
|
|
sump plug PND 110×18, 90 int. |
18 |
+1,0 |
200-250 |
+5,0 |
|
sump plug PND 110×18, 110 int. |
18 |
+1,0 |
200-250 |
+5,0 |